Update your browser

Your browser (Internet Explorer) is out of date.

Update your browser for more security, comfort and the best experience for this site.

Details for: DSPIC30F4012-30I/SP

Total stock available through FindChips: 7,079
No results were found.
  • High-Performance Modified RISC CPU:
  • Modified Harvard architecture
  • C compiler optimized instruction set architecture
  • 84 base instructions with flexible addressing modes
  • 24-bit wide instructions, 16-bit wide data path
  • 16 x 16-bit working register array
  • Up to 30 MIPs operation:- DC to 40 MHz external clock input
  • 4 MHz-10 MHz oscillator input with PLL active (4x, 8x, 16x)
  • Peripheral and External interrupt sources
  • 8 user selectable priority levels for each interrupt
  • 4 processor exceptions and software traps
  • Primary and Alternate interrupt Vector TablesDSP Engine Features:
  • Modulo and Bit-Reversed Addressing modes
  • Two, 40-bit wide accumulators with optional saturation logic
  • 17-bit x 17-bit single cycle hardware fractional/ integer multiplier
  • Single cycle Multiply-Accumulate (MAC) operation
  • 40-stage Barrel Shifter
  • Dual data fetchPeripheral Features:
  • High current sink/source I/O pins: 25 mA/25 mA
  • Optionally pair up 16-bit timers into 32-bit timer modules
  • wire SPI™ modules (supports 4 Frame modes)
  • I2C™ module supports Multi-Master/Slave mode and 7-bit/10-bit addressing
  • Addressable UART modules with FIFO buffersMotor Control PWM Module Features:
  • Complementary or Independent Output modes
  • Edge and Center Aligned modes
  • Multiple duty cycle generators
  • Dedicated time base with 4 modes
  • Programmable output polarity
  • Dead time control for Complementary mode
  • Manual output control
  • Trigger for synchronized A/D conversions
  • Quadrature Encoder Interface Module Features:
  • Phase A, Phase B and Index Pulse input
  • 16-bit up/down position counter
  • Count direction status
  • Position Measurement (x2 and x4) mode
  • Programmable digital noise filters on inputs
  • Alternate 16-bit Timer/Counter mode
  • Interrupt on position counter rollover/underflowAnalog Features:
  • 10-bit 1 Msps Analog-to-Digital Converter (A/D)
  • A/D Conversion available during Sleep and Idle
  • 4 Sample/Hold Channels
  • Multiple Conversion Sequencing OptionsSpecial Microcontroller Features:
  • Enhanced Flash program memory:
  • 10,000 erase/write cycle (min.) for industrial temperature range, 100K (typical)
  • Data EEPROM memory:
  • 100,000 erase/write cycle (min.) for industrial temperature range, 1M (typical)
  • Self-reprogrammable under software control
  • Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
  • Flexible Watchdog Timer (WDT) with on-chip low power RC oscillator for reliable operation
  • Fail-Safe clock monitor operation
  • Detects clock failure and switches to on-chip low power RC oscillator
  • Programmable code protection
  • In-Circuit Serial Programming™ (ICSP™)
  • Programmable Brown-out Detection and Reset generation
  • Selectable Power Management modes- Sleep, Idle and Alternate Clock modes
  • CMOS Technology:
  • Low power, high speed Flash technology
  • Wide operating voltage range (2.5V to 5.5V)
  • Industrial and Extended temperature ranges
  • Low power consumption
  • See More

Best Price for DSPIC30F4012-30I/SP


7,079 Total stock available through FindChips:

22% Savings:
ECIA (NEDA) Member • Authorized Distributor


DIGITAL SIGNAL CONTROLLER-DSC, 16 BIT, 48KB, 40MHZ, 5.5V DIP-28; Product Range:dsPIC30F Series; Core Frequency:40MHz; Flash Memory Size:48KB; No. of I/O s:20I/O s; Embedded Interface Type:CAN, I2C, SPI, UART; Core Supply Voltage:5.5V;RoHS Compliant: Yes

Price $4.4000 Stock 145 Buy Now

Price Details for DSPIC30F4012-30I/SP

Selected Stock: 1
Low Average High
Authorized $4.4000 $5.6938 $6.8800
Add to list:

Confirm BOM Data

Unable to save document.
Please try again.

Part Number ( parts) Qty CPN Designator

BOM Options

Preferred distributors for this list (0)

Select preferred distributors