Reference Designs

• Xilinx® Zynq® 7000 series (XC7Z015) Power Solution, 8W - Reference Design
  PMP10601.1: The PMP10601 reference design provides all the power supply rails necessary to power Xilinx® Zynq® 7000 series (XC7Z015) FPGA. This design uses several LMZ3 series modules, LDOs, and a DDR termination regulator to provide all the necessary rails to power the FPGA. It also features one LM3880 for power up and power down sequencing. This design uses a 12V input.
• Adjacent Channel Power Ratio (ACPR) and Error Vector Magnitude (%EVM) Measurements
  TIDA-00076: This reference design discusses the use of the TSW3085EVM with the TSW3100 pattern generator to test adjacent channel power ratio (ACPR) and error vector magnitude (EVM) measurements of LTE baseband signals. By using the TSW3100 LTE GUI, patterns are loaded into the TSW3085EVM which is comprised of the DAC3482, TRF3705, and LMK04806.
• Altera Arria V FPGA Power Supply Reference Design - PMP9357.1 - TI Tool Folder
  PMP9357: This reference design provides all the power supply rails necessary to power Altera's Arria V FPGA. This design uses the TPS54620 to generate the rails to power the FPGA.
• Wideband RF-to-Digital Complex Receiver-Feedback Signal Chain
  TIDA-00074: This is a wideband complex-receiver reference design and evaluation platform that is ideally suited for use as a feedback receiver for transmitter digital predistortion. The EVM signal chain is ideal for high intermediate-frequency (IF) complex-feedback applications and contains a complex demodulator, TI’s LMH6521 dual-channel DVGA and ADS5402 12-bit 800-MSPS dual-channel ADC. By modifying the onboard filter components, the signal chain is configurable for a variety of frequency plans. The EVM also includes TI’s LMK04808 dual-PLL clock jitter cleaner and generator to provide an onboard low-noise clocking solution. The LMH6521 DVGA gain is controlled through the GUI or alternatively through the high speed connector with an FPGA.
• Dynamic Field-Powered NFC for Data Logging Access Control & Security Applications Reference Design
  TIDA-00217: This reference design is a sub-system design for NFC (Near Field Communication) and authentication. This subsystem design is intended as a reference design for part authentication, access control, personal identification, battery-less sensor interface, security token transfer, and low power transfer of local data. In many systems, especially safety critical applications, it is imperative that only authentic, inspected, and properly maintained parts are utilized. The documentation describes the implementation of a subsystem capable of storing such information and communicating this data to the outside world by way of NFC or I2C/SPI/UART to a connected host controller. This reference design provides an easy method for wireless data and power transfer to any standard NFC compliant device.
• Piezo Speaker Strobe Notification Reference Design
  TIDA-00376: TIDA-00376 uses Texas Instrument’s industrial piezo driver, flash LED driver, and the ultra-low-power FRAM microcontroller (MCU) to demonstrate the implementation of both audible and visual notification subsystems, primarily intended for fire alert end-equipment systems. The TI Design demonstrates multiple alert tone frequency outputs through a single piezo transducer, as well as a low input current, high light output LED strobe.
• Automotive ADAS Power Design Optimized for Xilinx® Zynq® 7010 SoC
  TIDA-00389: The TIDA-00389 design is an optimized power solution for Xilinx® Zynq® 7010 FPGA/SoC (out of the Zynq® 7000 series family of products). It targets ADAS applications where customers opt to use FPGA instead of Multicore DSP or MPU. This design runs from a single intermediate 3.3V or 5V power supply rail and provides a complete solution to power the Xilinx® Zynq® 7010. DDR memory termination and a 5V supply for a CAN Transceiver are also implemented. A LM3880 provides power up and power down sequencing. The design is tested and optimized for automotive applications.
• Altera Arria V GZ FPGA Discrete Power Solution Reference Design
  PMP9357: The PMP9357 reference design is a complete power solution for Altera's Arria V series FPGAs. This design uses several TPS54620 synchronous step down converters, LDOs, and a DDR termination regulator to provide all the necessary rails to power the FPGA. To provide correct power sequencing, a UCD90120A power supply sequencer/monitor is used and can be controlled through I2C.
• Altera Arria V GX FPGA Power Solution Reference Design
  PMP9449: The PMP9449 reference design provides all the power supply rails necessary to power Altera's Arria® V GX family of FPGAs. It utilizes a TPS38600 to monitor the input supply and provide power on sequencing. This design features low cost, small footprint discrete ICs and is powered from a single 5V input.
• Xilinx® Zynq® 7000 series (XC7Z015) Power Solution, 8W - Reference Design
  PMP10601.2: The PMP10601 reference design provides all the power supply rails necessary to power Xilinx® Zynq® 7000 series (XC7Z015) FPGA. This design uses several LMZ3 series modules, LDOs, and a DDR termination regulator to provide all the necessary rails to power the FPGA. It also features one LM3880 for power up and power down sequencing. This design uses a 12V input.
• Multi-output Multi-buck 20W Power Supply for Xilinx Zynq FPGA Applications Reference Design
  PMP9335: PMP9335 is designed for Xilinx Zynq FPGA applications utilizing the TPS84A20 and TPS84320. This design uses an external timer to synchronize the switching frequency to 300 kHz. It also employs a controlled power up and power down sequence.
• Aptina™ Automotive Camera Module Reference Design
  TIDA-00098: The reference design is an automotive camera module solution with Aptina image sensor and processor, and TI FPD-Link III serializer. The module features the AR0132AT 1.2Mp image sensor, the AP0101AT image signal processor (ISP) from Aptina, and the LM34919C, TPS62231 buck regulator and DS90UB913A-Q1 FPD-Link III serializer from Texas Instruments. The combination offers a compact two-board automotive camera solution. Only one single coaxial cable is needed for the camera data/control signal transmission and input power supply.
• Backlight and Smart Lighting Control by Ambient Light and Proximity Sensor Reference Design
  TIDA-00373: This system conserves power and extends backlight life by dynamically adjusting the backlight brightness relative to the environment's ambient light. A capacitive proximity sensor wakes up the system when a user is close to save even more power. This reference design uses the HDC1000. This reference design can also be used with the HDC1008. Watch related videos about Sensing NOW.
• Humidity & Temp Sensor Node for Star Networks Enabling 10+ Year Coin Cell Battery Life Ref Design
  TIDA-00374: This TI Design uses Texas Instruments nano-power system timer, SimpleLink™ ultra-low power wireless microcontroller (MCU) platform, and humidity sensing technologies to demonstrate an ultra-low power method to duty-cycle sensor end nodes. These technologies lead to an extremely long battery life: over 10 years with a standard CR2032 lithium ion coin cell battery. The TI Design includes techniques for system design, detailed test results, and information to get the design up and running quickly. This reference design uses the HDC1000. This reference design can also be used with the HDC1008, and HDC1050.
• Humidity & Temp Sensor Node for Sub-1GHz Star Networks Enabling 10+ Year Coin Cell Battery Life
  TIDA-00484: The TIDA-00484 TI Design uses Texas Instruments' nano-power system timer, boost converter, SimpleLink™ ultra-low power Sub-1 GHz wireless microcontroller (MCU) platform, and humidity sensing technologies to demonstrate an ultra-low power method to duty-cycle sensor end nodes leading to extremely long battery life. The TI Design includes techniques for system design, detailed test results, and information to get the design up and running quickly.
• Xilinx® Zynq® 7000 series (XC7Z015) Power Solution, 8W - Reference Design - PMP10601.1 - TI Tool Folder
  PMP10601: The PMP10601 reference design provides all the power supply rails necessary to power Xilinx® Zynq® 7000 series (XC7Z015) FPGA. This design uses several LMZ3 series modules, LDOs, and a DDR termination regulator to provide all the necessary rails to power the FPGA. It also features one LM3880 for power up and power down sequencing. This design uses a 12V input.
• Altera Arria V FPGA Power Supply Reference Design
  PMP9357.1: This reference design provides all the power supply rails necessary to power Altera's Arria V FPGA. This design uses the TPS54620 to generate the rails to power the FPGA.
• Distance and Weight Measurement Using Inductive Sensing Reference Design
  TIDA-00215: The Distance and Weight Measurement Using Inductive Sensing Reference Design is a sub-system design which converts a distance measurement to a weight measurement. This design is intended as a reference design for building automation and weigh scale applications. In mechanical systems, there are many situations that require precise and accurate measurements of distance. One such scenario is the conversion of a distance measurement to a weight measurement, through the use of springs with well-known characteristics. This reference design enables weight and distance measurements to be incorporated into end systems, without the use of expensive magnets or other sensing materials.
• Capacitive-Based Human Proximity Detection for System Wake-Up & Interrupt Reference Design
  TIDA-00220: This TI Design uses Texas Instruments' capacitive-to-digital converter technology to provide a high-precision method to wake up systems when human interaction occurs. TIDA-00220 demonstrates techniques for alternative sensor design, environmental compensation, and electromagnetic interference protection.
• Basestation Transceiver with DPD Feedback Path
  TIDA-00068: The design is for a small cell base station development platform. It provides two real receive paths, two complex transmit paths, and a shared real feedback path. This design has macro basestation performance, but with small cell base station footprint. The current design handles up to 20MHz of bandwidth.
• Power Solution for Aptina Image Sensor in Automotive Camera Modules Reference Design
  PMP9300: The reference design provides a compact power solution (20x20mm board size) for the Aptina AR0132 image sensor in automotive camera modules. The design comes with a power supply board and a filter board. The power board has two sync-buck regulators, LM34919C and TPS62231, to provide 1.8V and 2.8V outputs. RC output filters are designed for the core, analog and I/O supply rails required by the image sensor in order to reduce the ripple and ensure proper power-up sequencing. The input voltage range is from 4.5V to 50V suitable for 12V automotive battery supply. The filter board is designed to enable the power over coax cable configuration, which allows transferring power and the FPD-Link III signal over one cable. There is also an input line filter option on both boards in case the power-over-coax configuration is not desired.
• Wideband Digital to RF Transmit Solution
  TIDA-00072: The TSW308x is an example design of a wideband digital to RF transmit solution capable of generating 600 MHz of contiguous RF spectrum. The system provides a reference on how to use the DAC34x8x, TRF3705 IQ modulator and LMK0480x to achieve this. This reference EVM coupled with a pattern generator such as the TSW1400EVM can be used to arbitrarily generate narrow band and wideband signals at RF. Examples of configurations to generate standards compliant WCDMA test signals are provided.
• 15A Non-Isolated DC/DC Converter
  PMP4316: This reference design is 15A high density non-isolated DC/DC converter for telecom applications.
• Altera Arria V FPGA Power Supply Reference Design
  PMP9357.2: This reference design provides all the power supply rails necessary to power Altera's Arria V FPGA. This design uses the TPS54620 to generate the rails to power the FPGA.
• Automotive ADAS Power Design Optimized for Xilinx® Zynq® 7020 SoC
  TIDA-00390: The TIDA-00390 design is an optimized power solution for Xilinx® Zynq® 7020 FPGA/SoC (out of the Zynq® 7000 series family of products). It targets ADAS applications where customers opt to use FPGA instead of Multicore DSP or MPU. This design runs from a single intermediate 3.3V or 5V power supply rail and provides a complete solution to power the Xilinx® Zynq® 7020. DDR memory termination and a 5V supply for a CAN Transceiver are also implemented. A LM3880 provides power up and power down sequencing. The design is tested and optimized for automotive applications.
• Altera Arria V FPGA Power Supply Reference Design - PMP9357.2 - TI Tool Folder
  PMP9357: This reference design provides all the power supply rails necessary to power Altera's Arria V FPGA. This design uses the TPS54620 to generate the rails to power the FPGA.
• Interface to a Sin/Cos Encoder with Sitara AM437x Reference Design
  TIDA-00178: The TIDA-00178 reference design is an EMC compliant industrial interface to Sin/Cos position encoders. Applications include industrial drives, which require accurate speed and position control. The design utilizes a 16-bit dual sample ADC with drop-in compatible 14- or 12-bit versions available, allowing for optimization of performance and cost. TIDA-00178 provides a direct connection to Sitara AM437x using SPI and QEP. For quick evaluation it features a 60-pin connector which directly fits the AM437x IDK. An example firmware for Sitara AM437x IDK is provided, which outputs the measured angle from the Sin/Cos encoder with up to 28-bit resolution through the Sitara’s USB virtual COM port.
• Xilinx® Zynq®7000 series (XC7Z015) Power Solution, 5W - Reference Design
  PMP10600.2: The PMP10600.2 reference design provides all the power supply rails necessary to power Xilinx® Zynq® 7000 series (XC7Z015) FPGA. This design uses several LMZ3 series modules, LDOs, and a DDR termination regulator. It also features one LM3880 for power up and power down sequencing. This design uses a 12V input.
• Dual-Wideband RF-to-Digital Receiver Design
  TIDA-00073: The TSW1265EVM is an example design of a wideband RF to digital dual receiver solution capable of digitizing up to 125MHz of spectrum. The system provides a reference on how to use the ADS4249, LMH6521, LMK0480x, and a dual mixer to achieve this. This reference EVEM coupled with a capture card such as the TSW1400 can be used to capture and analyze narrow band and wideband signals. Instructions are provided on how to change the LO and IF frequencies for different application needs. The TIDA-00073 was implemented with hardware from the TSW1265EVM.
• Reference Design - DDR3/DDR4 Power Supply with 5V Input and 10A Load for Industrial PCs
  PMP10029.1: This reference design shows a universal power supply solution for DDR3 and DDR4 memory. A synchronous Buck converter provides an output voltage of 1.35V for a 9A load in DDR3L configuration. A linear regulator provides a second voltage of 0.675V for a 2A load.
• Synchronous Upgrade to Plug In Power Module Reference Design
  PMP9454: The PMP9454 reference design is footprint compatible to the module PTN78060W. The PMP9454 reference design is an easy to use synchronous regulator with LM43603 SIMPLE SWITCHER stepdown DC-DC converter. PMP9454 is capable of driving up to 3A load current from a wide input voltage ranging from 7 to 36V. It provides exceptional efficiency, output voltage accuracy and dropout voltage in a small package. In addition, the PMP9454 device is compatible with the 24V industrial bus voltage. The adjustable frequency of PMP9454 module ranges from 200 kHz to 2.2MHz. However, the board has 500 kHz default frequency.
• Multi-output Multi-buck 20W Power Supply for Xilinx Zynq FPGA Applications Reference Design
  PMP9335.2: PMP9335 is designed for Xilinx Zynq FPGA applications utilizing the TPS84A20 and TPS84320. This design uses an external timer to synchronize the switching frequency to 300 kHz. It also employs a controlled power up and power down sequence.
• High-Efficiency Small Form Factor 35W Sync Buck Reference Design
  PMP10740: PMP10740 is a single-phase synchronous buck converter rated for 1V output at 35A from an input voltage of 5V. This design uses the LM27403 synchronous buck controller and two CSD87350Q5D power block MOSFETs provide maximum efficiency when combined with a 250nH ferrite output inductor. The design solution uses all ceramic capacitors to fit into a minimum board area.
• Altera Arria V FPGA Power Supply Reference Design
  PMP9357.5: This reference design provides all the power supply rails necessary to power Altera's Arria V FPGA. This design uses the TPS54620 to generate the rails to power the FPGA.
• Multi-output Multi-buck 20W Power Supply for Xilinx Zynq FPGA Applications Reference Design - PMP9335.2 - TI Tool Folder
  PMP9335: PMP9335 is designed for Xilinx Zynq FPGA applications utilizing the TPS84A20 and TPS84320. This design uses an external timer to synchronize the switching frequency to 300 kHz. It also employs a controlled power up and power down sequence.
• Interrupt-Based Ambient Light and Environment Sensor Node for Sub-1GHz Networks Reference Design
  TIDA-00758: The TIDA-00758 TI Design demonstrates a low-power method of wireless environmental sensing enabling up to 10 years of battery life. This design uses Texas Instruments’ SimpleLink™ ultra-low power sub-1 GHz wireless microcontroller (MCU) platform, and ambient light, humidity, and temperature sensing technologies to achieve interrupt-based sensor monitoring when running from the backup battery.
• Optical Heart Rate + Pedometer Reference Design on ARM Based Platform
  TIDA-00682: The TIDA-00682 reference design demonstrates how biometric sensors in a watch form factor can be used to obtain a person's heart rate and steps in real time. By combining the AFE4404 front-end IC and the InvenSense ICM-20655 with the ultra-low power processing capability of the wireless CC2650, it is possible to measure step count activity plus a very robust and high performance optical heart rate signal on an ARM based platform.
• Xilinx® Zynq®7000 series (XC7Z015) Power Solution, 5W - Reference Design - PMP10600.1 - TI Tool Folder
  PMP10600: The PMP10600.1 reference design provides all the power supply rails necessary to power Xilinx® Zynq® 7000 series (XC7Z015) FPGA. This design uses several LMZ3 series modules, LDOs, and a DDR termination regulator. It also features one LM3880 for power up and power down sequencing. This design uses a 12V input.
• Ultralow Power Multi-sensor Data Logger with NFC Interface Reference Design
  TIDA-00524: TIDA-00524 provides a complete reference design for asset tracking & cold chain data logging with over 5 year battery life and a simple NFC (Near Field Communication) interface for configuration & read back. For maximum flexibility, the system offers the choice of multiple sensor configurations to monitor temperature (TMP112), ambient light (OPT3001), and/or humidity (HDC1000). NFC is provided by TI’s RF430CL331H and up to 64KB of non-volatile FRAM memory is available with the MSP430FR5969 MCU.
• High Voltage Synchronous Buck, 5V/9A out of 48V Telecom Input Reference Design
  PMP10117: This reference design delivers 5.1V with 9A output current out of 48V. It could be also used for 48V automotive bus voltage.
• Energy Harvesting Ambient Light and Environment Sensor Node for Sub-1GHz Networks Reference Design
  TIDA-00488: The TIDA-00488 TI Design demonstrates an ultra-low power and a renewable method of wireless environmental sensing using daylight energy harvesting with an extremely long backup battery life. This design uses Texas Instruments’ ultra-low power harvester power management; SimpleLink™ ultra-low power sub-1 GHz wireless microcontroller (MCU) platform; and ambient light, humidity, and temperature sensing technologies to achieve continuous monitoring while the energy harvesting circuit is active and interrupt monitoring when running from the backup battery
• Xilinx Zynq 7000 Series (XC7Z045) 20W Reference Design
  PMP10613.2: The PMP10613 reference design provides all the power supply rails necessary to power Xilinx® Zynq® 7000 series (XC7Z045) FPGA. This design uses several LMZ3 series modules, LDOs, and a DDR termination regulator to provide all the necessary rails to power the FPGA. It also features one LM3880 for power up and power down sequencing. This design uses a 12V input.
• Noise-immune Capacitive Proximity Sensor System Reference Design
  TIDA-00466: The FDC2214 proximity and capacitive sensing design demonstrates the use of TI's capacitive sensing technology to sense and detect the presence of various objects. The design is a complete hardware and firmware solution. The firmware processes the data from one proximity sensor and two capacitive touch buttons via the FDC2214 to determine whether an object is in the intended sensing area. Dedicated colored LEDs light up once the device detects a target in close proximity to the board or detects a press on the buttons. The design is powered by one AA-battery.
• Multi-output Multi-buck 20W Power Supply for Xilinx Zynq FPGA Applications Reference Design
  PMP9335.1: PMP9335 is designed for Xilinx Zynq FPGA applications utilizing the TPS84A20 and TPS84320. This design uses an external timer to synchronize the switching frequency to 300 kHz. It also employs a controlled power up and power down sequence.
• 1-GHz Bandwidth Dual Channel Transmitter up to 4-GHz Reference Design
  TIDA-00409: The TSW38J84 EVM reference design provides a platform to demonstrate a wideband dual transmit solution that incorporates an integrated LO. The reference design utilizes the 2.5 GSPS DAC38J84 device with the high performance modulators: TRF3722 (including integrated PLL/VCO) and TRF3705. The TRF3722 and TRF3705 can be combined to form a dual transmit solution with the TRF3722 generating the local oscillator (LO) for both modulators. The interface between the DAC38J84 and the modulators is discussed as well as measurements showing the combined performance of the DAC and modulators. The measurements illustrate the bandwidth performance, output third order intercept performance, harmonic distortion and sideband suppression performance.
• Efficient, LDO-free Power Supply for a 12-bit 500-MSPS ADC Reference Design - PMP9767.2 - TI Tool Folder
  PMP9767: The electrical performance of data converters depends on the cleanliness of their supply voltages. Linear regulators (LDOs) are commonly used but have low efficiency and high power loss, which is unsuitable for portable applications. Using a switch mode power supply (SMPS) instead, such as the TPS62231 and TPS62237, is a cost-effective and efficient power supply solution. Such a solution does not degrade the performance of the 12-bit ADS540x family of analog to digital converters (ADCs) and does not waste excessive power. The test report shows the Signal to Noise Ratio (SNR) and Spurious-Free Dynamic Range (SFDR) comparisons between the two power supplies, which demonstrate the same performance.
• Xilinx Zynq 7000 Series (XC7Z045) 20W Reference Design
  PMP10613.1: The PMP10613 reference design provides all the power supply rails necessary to power Xilinx® Zynq® 7000 series (XC7Z045) FPGA. This design uses several LMZ3 series modules, LDOs, and a DDR termination regulator to provide all the necessary rails to power the FPGA. It also features one LM3880 for power up and power down sequencing. This design uses a 12V input.
• Dual Sensor Measurement Using Single Current-Loop with FSK Modulation Reference Design
  TIDA-00483: The TIDA-00483 reference design brings together several devices to create a subsystem capable of measuring the surrounding environment and communicating the temperature, humidity, and ambient light over a 4- to 20-mA current loop. The small foot print of the design contains all sensors, filters, and control circuitry to calculate and communicate the sensor data. The reference design is intended for process measurement applications in factory automation, field transmitters, and building automation. The sensors, MCU, and communication modules all run off power from the current loop, which requires less than 3.5 mA to achieve. This power configuration allows the rest of the current to be dynamically adjustable for the 4- to 20-mA loop communication protocol standard.
• Altera Arria V FPGA Power Supply Reference Design
  PMP9357.6: This reference design provides all the power supply rails necessary to power Altera's Arria V FPGA. This design uses the TPS54620 to generate the rails to power the FPGA.
• Synchronizing Multiple JESD204B ADCs for Emitter Position Location Reference Design
  TIDA-00467: A common technique to estimate the position of emitters uses the amplitude and phase shift data of a signal derived from an array of spatially distributed sensors. For such systems, it is important to guarantee a deterministic phase relationship between the sensors to minimize errors in the actual measured data. This application design will discuss how multiple Analog to Digital Converters (ADCs) with a JESD204B interface can be synchronized so that the sampled data from the ADCs are phase aligned.
• Xilinx® Zynq®7000 series (XC7Z015) Power Solution, 5W - Reference Design
  PMP10600.1: The PMP10600.1 reference design provides all the power supply rails necessary to power Xilinx® Zynq® 7000 series (XC7Z015) FPGA. This design uses several LMZ3 series modules, LDOs, and a DDR termination regulator. It also features one LM3880 for power up and power down sequencing. This design uses a 12V input.
• CAN to Wi-Fi Gateway Reference Design
  TIDA-00380: The TIDA-00380 CAN to Wi-Fi Gateway is a reference design that shows how to add Wi-Fi connectivity to a CAN network. The design provides a simple way for users to gain access to the CAN bus traffic via a web page. This connection can be used for diagnostics or to add the capability to control the CAN bus. This TI Design provides a complete solution with design files and test results.
• Reference Design - DDR3/DDR4 Power Supply with 5V Input and 10A Load for Industrial PCs
  PMP10029: This reference design shows a universal power supply solution for DDR3 and DDR4 memory. A synchronous Buck converter provides an output voltage of 1.35V for a 9A load in DDR3L configuration. A linear regulator provides a second voltage of 0.675V for a 2A load.
• Altera Arria V FPGA Power Supply Reference Design
  PMP9357.4: This reference design provides all the power supply rails necessary to power Altera's Arria V FPGA. This design uses the TPS54620 to generate the rails to power the FPGA.
• High-Efficiency Small Form Factor 112W Sync Buck Reference Design
  PMP10691: PMP10691 is a single-phase synchronous buck converter rated for 3.3V output at 35A from an input voltage of 12V. This design uses the LM27403 synchronous buck controller. Two CSD87350Q5D power block MOSFETs provide maximum efficiency when combined with a 250nH ferrite output inductor. The design solution uses all ceramic capacitors to fit into a minimum board area.
• High Power Density Voltage Regulator Module for CPU Core Power in Enterprise Switching
  PMP7935: The PMP7935 is a single-phase synchronous buck converter module rated for 0.9V output at 45A from an input voltage of 12V. It is used for CPU core power in an enterprise network switching application. The small 1.1"x0.65" module delivers 90% peak efficiency and is smaller and less costly than equivalent multi-phase designs. This modular solution lends itself well to data center equipment where heat generation is increasingly expensive and a high power density is required.
• Class 1 Isolated Synchronous Flyback Converter (3.3V/900mA) for PoE PD Applications Reference Design
  PMP9068: This converter is used for Class 1 PoE PD applications where isolation is required. The synchronous rectifier driven from the main xfmr provides good efficiency and low cost. This converter is well suited for low cost IP Phone applications
• High-Efficiency Small Form factor 150W Sync Buck Reference Design
  PMP8000: PMP8000 is a single-phase synchronous buck converter rated for 5V output at 30A from an input voltage of 12V. This design uses the LM27403 synchronous buck controller and CSD87350Q5D power block MOSFETs provide maximum efficiency when combined with a 250nH ferrite output inductor. The design solution uses all ceramic capacitors to fit into a minimum board area.
• Isolated Loop Powered Thermocouple Transmitter Reference Design
  TIDA-00189: The Isolated Loop powered Thermocouple Transmitter reference design is a system solution providing precision K-type thermocouple measurements for 4 to 20-mA isolated current-loop applications. This design is intended as an evaluation module for users to fast prototype and develop end-products for process-control and factory-automation. Potential challenges with thermocouples as a temperature sensor include tiny voltage outputs, low sensitivity and nonlinearity; in addition, because in industrial environments ground potential differences higher than 100V are common, thermocouple and signal conditioning circuitry must be galvanically isolated. The design files include design considerations, block diagrams, schematics, Bill of Materials (BOM), layer plots, Altium files, Gerber Files, and MSP430 Firmware. Watch the TIDA-00349 Overview video, covering the same isolated power topology as used in the TIDA-00189 NOW
• Xilinx Zynq 7000 Series (XC7Z045) 20W Reference Design - PMP10613.1 - TI Tool Folder
  PMP10613: The PMP10613 reference design provides all the power supply rails necessary to power Xilinx® Zynq® 7000 series (XC7Z045) FPGA. This design uses several LMZ3 series modules, LDOs, and a DDR termination regulator to provide all the necessary rails to power the FPGA. It also features one LM3880 for power up and power down sequencing. This design uses a 12V input.
• Low Voltage Brushed Motor System
  TIDA-00115: This brushed motor system implements an MSP430 microcontroller, a DRV8837 brushed DC motor driver, and a 12V brushed motor. It is suitable for applications requiring up to 10300 RPM under no load condition. The system is 19 x 33 mm, excluding the motor, making it ideal for applications that require a small footprint. Motor power supply voltage support is 1.8V to 11V, and max current is 1.8A. Several configuration options allow for easy control over the speed of the motor's rotation, changing the direction of rotation, and sending the system into a low power state when not in operation to reduce power consumption. The motor drive stage has integrated protection from short-circuit, shoot-through, under-voltage, and over-temperature.
• Altera Arria V FPGA Power Supply Reference Design
  PMP9357.3: This reference design provides all the power supply rails necessary to power Altera's Arria V FPGA. This design uses the TPS54620 to generate the rails to power the FPGA.
• 5V, 3-Phase, Sensorless Motor System With Variable Speed Control
  TIDA-00112: This reference design provides a simple way to spin and control a 5V, 3-phase, BLDC fan motor with minimum development time and overhead. It utilizes the DRV10866, a sensorless BLDC motor driver, for the power stage and a TLC555 timer to provide a variable duty cycle PWM signal for speed control. The DRV10866 uses a 150 degree sensorless BEMF control scheme that takes away the need for external sensors on the motor.
• Automotive USB Battery Charging Reference Design
  PMP8851: This USB battery charging reference design is optimized for size in order to fit within an automobile power accessory port. The design features a USB dedicated charging port controller with integrated current limiting power switch and a 42V DC/DC converter. High integration and small package sizing allows a small form factor.
• Touch on Metal Buttons With Integrated Haptic Feedback Reference Design
  TIDA-00314: This TI Design uses Texas Instruments' inductance-to-digital converter technology to provide a high-precision method to sense button presses on a metal surface and TI's Haptic Drivers provide high quality haptics feedback to the user. TIDA-00314 demonstrates techniques for system design, environmental compensation, and electromagnetic interference protection. Watch a TIDA-00314 Overview video on the Touch on Metal Buttons With Integrated Haptic Feedback NOW.
• DM385 IP Camera Reference Design
  DM385-AR0331: Single platform solution provides SVCT/H.264 1080P 60 fps + SVCT/H.264 D1 30 fps + MJPEG 1080P 5 fps, and up to 10 megapixels at reduced frame rate.
• Isolated Auxiliary Flyback for Telecom Apps with 5V @ 300mA & 120V @ 80mA Reference Design
  PMP8580: This design is an auxiliary flyback with telecom input range (36..60V) providing two outputs. The two outputs (5.0V @ 300mA and 12.0V @ 80mA) are isolated to the primary side as well as to each other.