Part Details for SW-277 by MACOM
Results Overview of SW-277 by MACOM
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (1 option)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Space Technology
Medical Imaging
Telecommunications
SW-277 Information
SW-277 by MACOM is an RF/Microwave Switch.
RF/Microwave Switches are under the broader part category of RF and Microwave Components.
RF and Microwave Engineering focuses on the design and operation of devices that transmit or receive radio waves. The main distinction between RF and microwave engineering is their wavelength, which influences how energy is transmitted and used in various applications. Read more about RF and Microwave Components on our RF and Microwave part category page.
Price & Stock for SW-277
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Bristol Electronics | 312 |
|
RFQ | ||
|
|
Vyrian | RF & Microwave | 1343 |
|
RFQ |
Part Details for SW-277
SW-277 CAD Models
SW-277 Part Data Attributes
|
|
SW-277
MACOM
Buy Now
Datasheet
|
Compare Parts:
SW-277
MACOM
SPDT, 0MHz Min, 2000MHz Max, 1 Func, 0.65dB Insertion Loss-Max, GAAS, PLASTIC, MS-012AA, SOIC-8
|
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | M/A-COM TECHNOLOGY SOLUTIONS INC | |
| Package Description | PLASTIC, MS-012AA, SOIC-8 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8536.50.70.00 | |
| 1dB Compression Point | 33 dBm | |
| Additional Feature | HIGH RELIABILITY | |
| Characteristic Impedance | 50 Ω | |
| Construction | COMPONENT | |
| Input Power-Max (CW) | 42.04 dBm | |
| Insertion Loss-Max | 0.65 dB | |
| Isolation-Min | 27 dB | |
| Mounting Feature | SURFACE MOUNT | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| On Time-Nom | 0.035 µs | |
| Operating Frequency-Max | 2000 MHz | |
| Operating Frequency-Min | ||
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Equivalence Code | SOP8,.25 | |
| Power Supplies | 5 V | |
| RF/Microwave Device Type | SPDT | |
| Surface Mount | YES | |
| Technology | GAAS | |
| VSWR-Max | 1.2 |
Alternate Parts for SW-277
This table gives cross-reference parts and alternative options found for SW-277. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of SW-277, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| SW-277 | TE Connectivity | Check for Price | SW-277 | SW-277 vs SW-277 |
SW-277 Frequently Asked Questions (FAQ)
-
MACOM provides a recommended PCB layout and land pattern in their application note AN-2171, which can be found on their website. It's essential to follow these guidelines to ensure optimal performance, minimize signal loss, and prevent electromagnetic interference (EMI).
-
To ensure reliable operation over the entire operating temperature range (-40°C to 85°C), it's crucial to follow proper thermal management practices, such as providing adequate heat sinking, using a thermally conductive PCB material, and avoiding thermal hotspots. Additionally, ensure that the device is operated within its specified power dissipation limits.
-
MACOM recommends using a CMOS-compatible drive circuit with a voltage swing of 0V to VCC (typically 3.3V or 5V) for the control pins. A 1 kΩ to 10 kΩ pull-up resistor can be used to ensure a clear logic level. Additionally, a series resistor (e.g., 100 Ω) can be added to prevent over-voltage conditions.
-
To minimize insertion loss and optimize signal integrity, ensure that the PCB layout is designed with minimal trace length and impedance discontinuities. Use a 50 Ω transmission line impedance, and consider using a ground plane or shielding to reduce electromagnetic interference (EMI). Additionally, use a high-quality, low-loss PCB material and follow MACOM's recommended PCB layout guidelines.
-
The SW-277 is a sensitive device and requires proper ESD protection and handling. MACOM recommends following standard ESD handling procedures, such as using an ESD wrist strap or mat, and storing the devices in anti-static packaging. The device can withstand a human body model (HBM) ESD event of up to 2 kV.