Part Details for LP38692 by National Semiconductor Corporation
Overview of LP38692 by National Semiconductor Corporation
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Not Available)
- Reference Designs: (Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Available Datasheets
Part # | Manufacturer | Description | Datasheet |
---|---|---|---|
LP38692SDX-5.0/NOPB | Texas Instruments | 1A Low Dropout CMOS Linear Regulators, Stable with Ceramic Output Capacitors 6-WSON -40 to 125 | |
LP38692MP-1.8/NOPB | Texas Instruments | 1A Low Dropout CMOS Linear Regulators, Stable with Ceramic Output Capacitors 5-SOT-223 -40 to 125 | |
LP38692MPX-3.3/NOPB | Texas Instruments | 1A Low Dropout CMOS Linear Regulators, Stable with Ceramic Output Capacitors 5-SOT-223 -40 to 125 |
Part Details for LP38692
LP38692 CAD Models
Resources and Additional Insights for LP38692
Reference Designs related to LP38692
-
PMP1941 适用于汽车的反激式降压 (4.5V@0.05A)
A triple-output non-isolated flyback converter provides a regulated low voltage and two high voltage rails. A buck converter with an input transient voltage-clamping circuit produces a 5V rail. The addition of a dithering circuit creates spread-spectrum operation on the switching frequency to low
-
Power Solution for Terasic DE2-115 (Cyclone IV)
The PMP10581 reference design provides all the power supply rails necessary to power Altera’s Cyclone® IV E FPGA. DE2-115 was developed by Terasic and this board is available for purchase through Terasic’s website.
-
Low Cost: Small Solution Size Power Management Reference Design for CC3200 SimpleLink Wi-Fi
The TIDA-00534 reference design provides guideline and test data of a cost effective small size power solution to power the main 3.3V voltage rails of the CC3200 wireless MCU or any other noise sensitive system from a 5V voltage source.
-
DOLPHIN-WUART-REF 跳频扩频 (FHSS) 无线 UART 芯片组参考设计
Dolphin is a Frequency Hopping Spread Spectrum (FHSS) Wireless UART chipset for the 902-928 MHz US ISM Band. The Dolphin chipset is a FCC pre-certified reference design and consists of the TRF6903 RF transciever and the digital baseband ASIC DBB03. The DBB03 contains the firmware for the Dolphi